Workshop tools are the items used to measure, cut, fix, shape, and assemble materials in a work area. These tools are commonly seen in school workshops, garages, and repair rooms. Learning workshop tools and equipment names helps readers understand instructions, labels, and tool references used during practical work.
This article focuses on workshop tools and their commonly used names. Knowing these names makes it easier to follow lessons, manuals, and basic workshop activities.
In This Page
List Of Common Workshop Tools Names
Common workshop tools are the basic tools used in most workshops for everyday tasks. They help with measuring, cutting, tightening, gripping, and holding materials during simple repairs and building work. Learning these common workshop tools names makes it easier to understand tool labels and follow instructions when working in a workshop.
- Hammer: Used to hit nails and tap parts into place.
- Claw Hammer: Used to drive nails and pull nails out.
- Mallet: Used to strike without damaging the surface.
- Screwdriver: Used to tighten and loosen screws.
- Phillips Screwdriver: Used for cross head screws.
- Flathead Screwdriver: Used for slotted head screws.
- Adjustable Wrench: Used to turn nuts and bolts of different sizes.
- Spanner: Used to tighten and loosen nuts and bolts.
- Socket Wrench: Used with sockets to turn nuts and bolts.
- Pliers: Used to grip, bend, and hold small parts.
- Needle Nose Pliers: Used to grip small items in tight spaces.
- Locking Pliers: Used to clamp and hold parts firmly.
- Wire Cutters: Used to cut electrical wire and thin metal wire.
- Utility Knife: Used to cut cardboard, plastic, and thin materials.
- Tape Measure: Used to measure length and distance.
- Steel Ruler: Used to measure short lengths and draw straight lines.
- Spirit Level: Used to check if a surface is level.
- Handsaw: Used to cut wood by hand.
- Hacksaw: Used to cut metal and plastic pipes.
- Chisel: Used to cut and shape wood or metal.
- File: Used to smooth rough edges and shape material.
- Clamp: Used to hold materials together while working.
- C Clamp: Used to clamp items tightly to a bench.
- Bench Vise: Used to hold parts steady for cutting or drilling.
- Sandpaper: Used to smooth surfaces before finishing.
Workshop Storage Equipment Names
Workshop storage equipment names are used for items that organize, carry, and sort tools and small parts in a workshop. These storage items help keep tools in fixed places, reduce mess, and make daily work faster. Below is a list of workshop storage equipment names.
- Toolbox
- Tool Bag
- Tool Pouch
- Tool Box Organizer
- Tool Chest
- Rolling Tool Chest
- Tool Cabinet
- Wall Cabinet
- Drawer Cabinet
- Workbench Drawer Unit
- Pegboard
- Pegboard Hooks
- Tool Rack
- Wall Tool Rack
- Tool Holder
- Magnetic Tool Strip
- Magnetic Tray
- Parts Organizer
- Small Parts Organizer
- Compartment Box
- Hardware Organizer
- Bin Organizer
- Storage Bins
- Stackable Bins
- Shelf Unit
- Storage Shelves
- Storage Rack
- Wall Shelf
- Plastic Storage Box
- Latching Storage Box
- Carry Case
- Bit Case
- Socket Organizer
- Wrench Organizer
- Screwdriver Rack
- Drill Bit Index
- Label Tags
- Cable Ties
- Ziplock Bags
Workshop Safety Equipment Names
Workshop safety equipment names are used for protective items that reduce risk during cutting, drilling, grinding, welding, and handling materials. These safety items protect the eyes, hands, ears, lungs, and feet, and they are common in school workshops and home garages. Below is a list of workshop safety equipment names.
- Safety Glasses
- Safety Goggles
- Face Shield
- Welding Helmet
- Welding Goggles
- Ear Plugs
- Ear Muffs
- Dust Mask
- Respirator
- Cartridge Respirator
- Work Gloves
- Cut Resistant Gloves
- Heat Resistant Gloves
- Welding Gloves
- Safety Boots
- Steel Toe Boots
- Protective Apron
- Leather Apron
- Welding Jacket
- High Visibility Vest
- Hard Hat
- Knee Pads
- First Aid Kit
- Eye Wash Bottle
- Eye Wash Station
- Fire Extinguisher
- Fire Blanket
- Smoke Detector
- Carbon Monoxide Detector
- Warning Sign
- Safety Cone
- Non Slip Mat
- Spill Kit
Workshop Measuring Tools Names
Measuring tools names are used for checking length, size, angle, and alignment before cutting or fitting.
Workshop Marking Tools Names
Marking tools are used to draw lines, points, or guides on materials.
- Carpenter’s Pencil
- Marker
- Chalk Line
- Marking Knife
- Scriber
- Center Punch
Workshop Layout Tools Names
Layout tools help with straight lines, angles, and surface alignment.
- Steel Ruler
- Folding Rule
- Combination Square
- Try Square
- Speed Square
- Spirit Level
- Plumb Bob
Workshop Checking Tools Names
Checking tools are used for precise measurement and fitting work.
- Caliper
- Vernier Caliper
- Micrometer
- Feeler Gauge
Workshop Cutting Tools Names
Cutting tools names include tools used to remove material by slicing or sawing.
Workshop Hand Cutting Tools Names
These cutting tools are operated by hand and used for controlled cutting.
- Handsaw
- Hacksaw
- Coping Saw
- Keyhole Saw
- Tin Snips
- Bolt Cutters
- Wire Cutters
- Utility Knife
Workshop Power Cutting Tools Names
Power cutting tools use electricity or batteries to cut materials quickly.
- Circular Saw
- Jigsaw
- Reciprocating Saw
- Miter Saw
- Table Saw
- Band Saw
- Angle Grinder
Workshop Blades And Cutting Bits Names
These names refer to the cutting parts used with tools.
- Saw Blade
- Jigsaw Blade
- Cutting Disc
- Drill Bit
- Hole Saw
- Router Bit
Workshop Hand Tools Names
Hand tools are tools that work without electricity and form the base of most workshop tasks.
Workshop Fastening Tools Names
Fastening tools are used to join materials using nails, screws, or staples.
- Claw Hammer
- Mallet
- Screwdriver
- Hex Key Set
- Nut Driver
- Staple Gun
- Rivet Gun
Workshop Holding Tools Names
Holding tools keep materials steady during cutting or assembly.
- Bench Vise
- C Clamp
- Bar Clamp
- Spring Clamp
- Locking Pliers
- Pipe Wrench
Workshop Striking Tools Names
Striking tools are used for hitting, shaping, or marking materials.
- Ball Peen Hammer
- Sledgehammer
- Dead Blow Hammer
- Punch Set
- Center Punch
Workshop Fitting Tools Names
Fitting tools are used to shape or adjust parts for proper fitting.
- File
- Rasp
- Chisel
- Hand Plane
- Scraper
Automotive Workshop Tools Names
Automotive workshop tools names are commonly used in garages and vehicle repair areas.
Car Lifting Tools Names
These tools are used to lift and secure vehicles.
- Car Jack
- Floor Jack
- Jack Stand
- Wheel Chock
Automotive Diagnostic Tools Names
Diagnostic tools names are used for checking vehicle systems.
- OBD2 Scanner
- Test Light
- Multimeter
- Battery Tester
Oil Change Tools Names
These tool names are linked to basic vehicle maintenance tasks.
- Oil Filter Wrench
- Drain Pan
- Funnel
- Torque Wrench
Mechanical Workshop Tools Names
Mechanical workshop tools are used for fitting, tightening, and precision work.
- Spanner Set
- Socket Set
- Torque Wrench
- Allen Key Set
- Feeler Gauge
- Tap And Die Set
- Bearing Puller
Wood Workshop Tools Names
Wood workshop tools names are used in carpentry and woodworking tasks.
Wood Shaping Tools Names
These tools are used to shape and smooth wood surfaces.
- Hand Plane
- Chisel
- Router
- Wood File
- Sander
Wood Joining Tools Names
Joining tools names relate to connecting wood pieces.
- Wood Glue
- Clamps
- Nail Gun
- Screwdriver
- Pocket Hole Jig
Welding Workshop Tools Names
Welding workshop tools names are related to metal joining and preparation.
Welding Equipment Names
- Welding Machine
- Welding Electrode
- Welding Wire
- Welding Clamp
- Welding Table
Welding Safety Tools Names
- Welding Helmet
- Welding Gloves
- Leather Apron
- Welding Jacket
Welding Cleaning Tools Names
- Wire Brush
- Chipping Hammer
- Angle Grinder
FAQs about Workshop Tools
Workshop tools are items used for measuring, cutting, shaping, tightening, and holding materials during repair and building work.
Workshop tools are usually hand held items, while equipment refers to machines, storage units, and fixed workshop setups.
Commonly used workshop tools include hammer, screwdriver, wrench, pliers, tape measure, saw, file, and clamp.
Knowing workshop tools names helps readers understand labels, instructions, diagrams, and classroom or training explanations.
Most workshop tools names remain the same across schools, garages, and training centers, with only small regional variations.
Conclusion
Workshop tools names are easier to learn when they are grouped by purpose and use. This structured list supports learning through pictures, charts, and labeled diagrams. Knowing these names helps with tool identification, classroom learning, and basic workshop understanding.
Read More
